Controls - 26 RT80 Operator’s Manual
Center Console
CMW
6. Hydraulic filter
restriction indicator
Lights when hydraulic filter is
restricted.
May also light in cold weather.
When indicator lights, change filter.
Run tractor at low engine speed until
hydraulic fluid warms. Indicator will
turn off after hydraulic fluid warms.
7. High speed indicator Lights when transmission is in
high.
8. Low speed indicator Lights when transmission is in
low.
9. Shift alert indicator Lights and alarm sounds
when transmission is not fully
in high or low gear.
If shift does not complete:
• Return ground drive hand control
and foot pedal to neutral.
• Press opposite side of
transmission shift control, then try
to shift again.
• If shift still does not complete,
move tractor slightly forward or
backward, return ground drive
hand control and foot pedal to
neutral, and shift again.
Item Description Notes
To Next Page
Loading...
Need help?
General
