Controls - 30 RT80 Operator’s Manual
Center Console
CMW
6. Hydraulic ground drive
motor speed control
To shift into high, press and
hold top. High speed indicator
will light.
To shift into low, press and
hold bottom. Low speed
indicator will light.
IMPORTANT: This control will shift
ground drive speed with tractor in
motion. Expect a sudden change in
speed.
7. Transmission gearbox
speed control
To shift into high, press and
hold top. High speed indicator
will light.
To shift into low, press and
hold bottom. Low speed
indicator will light.
NOTICE: Ensure that both ground
drive hand and foot controls are in
neutral before shifting.
If shift does not complete:
• Return ground drive hand control
and foot pedal to neutral.
• Press opposite side of switch,
then try to shift again.
• If shift still does not complete,
move tractor slightly forward or
backward, return ground drive
hand control and foot pedal to
neutral, and shift again.
8. Auxiliary outlet Provides power for other
equipment.
Power output is 12V, 5A.
Item Description Notes
H
L
c00ic547h.eps
H
L
c00ic547h.eps