DITTING 807 - Page 27

Problem Cause Remedy
The grinder
does not grind
con nuously
or the grinding
process stops
intermi ently.
• The grinder stops
automa cally
a er 5 min.
• The start bu on is
faulty.
 Restart the grinding process (see
“Star ng the grinding process”
sec on).
 Contact your supplier
(see “Maintenance and service”
sec on).
The bean hop-
per cannot be
put in place.
• There are beans
in the bean hop-
per intake.
 Remove the beans from the bean
hopper intake.
The bean hop-
per cannot be
closed.
• There are beans
in the bean hop-
per lid.
 Remove the beans from the bean
hopper lid.
The folding
table cannot be
put onto the
rail.
• The adjus ng
screw is screwed
in too far.
 Unscrew the adjus ng screw un l
it is screwed fl ush in the folding
table holder.
The fi lter basket
holder cannot
be put onto the
rails.
• The adjus ng
screw is screwed
in too far.
 Unscrew the adjus ng screw un l
it is screwed fl ush in the fi lter
basket holder.
27
807 | EN