Dixie Chopper Eco-Eagle Xcaliber - Specifications

10
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
XCALIBER Eco-Eagle
Engine
• Generac 990c.c. CNG vertical shaft V-twin four-cycle air cooled engine.
• Electric start.
• Gear-driven oil pump.
• Engine-mounted replaceable, 25 micron Generac oil lter.
• Low oil warning horn (98db).
• Dual-Stage Donaldson air cleaner with Turbo pre-cleaner.
Electrical
• 12 Volt, 450 cold cranking amps, maintenance-free battery.
• 20 amp alternator/stator with regulator-rectier.
• Seat safety switch shuts off engine when operator leaves the seat.
Fuel Capacity
• 9.0 Gas Gallons Equivalent
Seat
• Deluxe Michigan seat with arm rest, lumbar, and suspension.
Gauges
•Tachometer/Hour meter
Drive System
• (2) White Hydraulic 18 c.c. pumps.
• (2) White Hydraulics HB series hydraulic motors; 17.4 c.i. displacement with case
ush loop (“Quad Loop”).
• (2) 40-micron hydraulic lters.
• (2) Hand-operated forward/reverse steering/braking controls.
• 2.5 gallon hydraulic reservoir.
• (2) External, remote-mounted hydraulic oil coolers.
• Lubrication: Lucas 15w40 Magnum.
• Electric cooling fan mounted above hydraulic pumps.
• T-Box reservoir for easy checking and lling.
Controls
• Console mounted electric mower deck height adjustment
• (2) Hand-operated steering control levers.
• Hand operated PTO switch
• Throttle control and ignition switch.
• Choke.
• Positive lock drum-type parking brake.
• Operator controlled discharge chute. (OCDC)
Steering
• Independent control of drive wheels through steering control levers.
Brakes
• Dynamic braking through steering levers.
• Parking brake gives positive lockup of drive wheels when applied.
Main Frame
• All welded six rail tube frame using 1” X 2” X .125” steel tubing.
• Lifetime on frame materials and workmanship.
• Lifetime on stainless steel against rust.
• Stainless steel ip-up oor pan.
Specications