Dixie Chopper Eco-Eagle Xcaliber - Mower Deck; Cutting Height

11
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
Specications
XCALIBER Eco-Eagle (cont’d)
Main Frame
• Stainless steel ip-up oor pan.
• Suspension front fork assembles.
• Engine guard and front bumper.
• Rear hitch with 2000 lb. towing capacity.
Mower Deck
• (4) Deck leveling bolts.
• Electric Clutch
• Welded bafes.
• Deck height adjusts straight up and down so pitch is always constant.
• Floating deck mounted to rigid frame (does not run on the ground).
• Deck rollers to prevent scalping.
• Keyless sealed spindle.
• 1-1/4” Effective diameter spindle shafts with self-tightening spindle assembly.
Deck Materials
• Seven (7) gauge shell (.179” thickness).
• Seven (7) gauge reinforcing top plate (.179” thickness)(bolted, not welded).
• Total thickness in critical area =.358”.
• One piece cast iron deck spindle housing.
• Vented, split 3/16” steel deep groove pulleys.
Tires/Wheels
• Rear: 27” X 13” X 12” Turfboss IV tubeless ATV-type 4-ply rating (6-8 lbs air pressure).
• Front: 15” X 6.00” X 8” tubeless 4-ply rating.
Ground Speed
•0-9 mph forward and reverse
Cutting Height
•1”-5”
Cut Width
•66”
Machine Width
•71.5”
Length
•83”
Height
•Roll bar down 52” - up 73”
Weight
•1724 lbs
Warranty
• Three-Year Bumper to Bumper, two year parts and labor, 3rd year parts.
• Three-Year Generac engine*
• Lifetime on front forks against breakage.
• Lifetime on steering linkages and levers against breakage.
• Three-Year deck spindles.
• Dixie Chopper meets and exceeds all ANSI standards.
*See Authorized Dixie Chopper Dealer for details. *Specications are subject to change.*