Dixie Chopper Eco-Eagle Xcaliber - Major Features; Warranty Registration

12
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
100%
MPH x cut width
=
Acres per hour
99
80%
MPH x cut width
=
Acres per hour
120
Major Features
At Dixie Chopper, we believe that every machine
should pack the maximum amount of perfor-
mance. We also believe if you listen to your cus-
tomers, they will tell you what they want; and we
have been listening to our customers for years!
In the realm of industrial lawn mowers, the
Xcaliber series is King. The Xcaliber CNG,
also known as the “Eco-Eagle”, is offered with a
cutting width of 66” and comes equipped with a
990cc Generac Engine that has been tuned to
run on CNG (Compressed Natural Gas), which
is considerably cheaper and much cleaner than
gasoline.
Productivity Chart
The following is an “Acres Per Hour” produc-
tivity chart for the Xcaliber CNG model Dixie
Chopper mower. Efciency ratings of 100% and
80% are shown. Eighty percent reects actual
mowing conditions, considering turns and over-
lapping.
MPH 100% 80%
4.0 2.67 2.20
5.0 3.33 2.75
6.0 4.00 3.30
7.0 4.67 3.85
8.0 5.33 4.40
9.0 6.00 4.95
Serial Number Identication
The Serial number of you Dixie Chopper lawn-
mower is located on the Serial Number Decal.
This decal is located on the left side of the upper
cross-member under the seat and also on the
bottom side of the seat pan.
Warranty Registration
The Warranty Registration card MUST be lled-
out and signed with the dealer. Alternatively, the
dealer may wish to perform this function online.
Specications
XCALIBER Eco-Eagle (cont’d)