Dixon 2004 - Page 32

32
BELTS:
Check belts every 50 hours. Replace any belts found to
be in poor condition.
BELT TENSION
Transaxle Drive Belt (all Zeeter Models) - P/N 7650
No adjustment required.
30” Zeeter
Manual clutch - P/N 7725
No adjustment required.
36” Zeeter
Electric Clutch - P/N 14136
Adjust idler shock mount per diagram.
Idler Weldment
“L” Rod
Idler Shock Mount
Hex Nut
5
8
Tighten or
Loosen
Hex Nut to
achieve
this
dimension
CARE AND MAINTENANCE