dji Aeroscope Mobile User Manual

5
1. Open Aeroscope.
2. Make sure the CrystalSky monitor is securely
connected to the USB port.
3. Attach the antennas.
4. Install the Intelligent Batteries when using Intelligent
Batteries to supply power. Connect the power port
to a power outlet (100-240V, 50/60Hz) when using
the power port to supply power.
5. Press twice quickly and hold on the second press
to turn on Aeroscope.
6. Press and hold the CrystalSky’s power button to turn
it on. Tap “Applications” then select “Aeroscope”.
The Intelligent Batteries will charge when the power port is connected to a power outlet.
Refer to the DJI CrystalSky user guide for more monitor usage details.
Refer to the user manual built into the Aeroscope application for more usage details.
Usage
Follow steps below to install and run the Aeroscope.
Specications
Safety and Standards
Model AS-P1800
Ingress Protection Rating IP54 (Folded)
Electromagnetic Compatibility
Aeroscope meets electromagnetic compatibility
requirements and the below criteria:
Europe:
EN 55032: 2015
EN 55024: 2010+A1: 2015
EN 61000-3-2: 2014
EN 61000-3-3: 2013
United States:
47 CFR Part 15, Subpart B: 2016
Electrical Specications
Power Consumption *** Approx. 70 W
Input Voltage Voltage range: 100 to 240 V AC

dji Aeroscope Mobile Specifications

General

Brand	dji
Model	Aeroscope Mobile
Category	Drone & Quadcopter Accessories
Language	English