dji AGRAS MG-1P Series

AGRAS MG-1P SERIES User Manual
40
© 2018 DJI All Rights Reserved.
In Manual operation mode, users have complete control of the aircraft. Pay attention to
the ying speed and direction when operating. Make sure to be aware of the surrounding
environment and avoid the radar module’s blind spots.
The obstacle avoidance functions are disabled in Attitude mode.
Obstacle avoidance is adversely affected when aircraft pitch exceeds 15°. Please y with
care.
Obstacle avoidance is disabled when ying over surfaces at a height of < 0.8 m.
Aircraft speed should not exceed 5 m/s when flying over surfaces at a height of < 2
m. Aircraft speed should not exceed 7 m/s when flying at a height of ≥ 2 m. Obstacle
avoidance will otherwise be greatly compromised or even disabled.
The radar module enables the aircraft to maintain a xed distance from vegetation only
within its working range. Observe the aircraft’s distance from the vegetation at all times.
Operate with extra caution when flying over inclined surfaces (depending on aircraft
speed). Recommended maximum inclination at different speeds: 10° at 1 m/s, 6° at 3 m/s
and 3° at 5 m/s.
Please maintain full control of the aircraft at all times. DO NOT rely solely on the DJI
MG app. Keep the aircraft within a visual line of sight observing it at all times. Use your
discretion to operate it manually to avoid obstacles.
Comply with local radio transmission laws and regulations.
The radar module can only function properly in at landscapes and cannot function in sloping
landscapes with inclinations more than 10° or in landscapes with sudden changes in elevation.
To avoid radar interference, DO NOT use several aircraft within a short distance of each
other.
Before use, ensure that the outer protective cover is not cracked, chipped, sunken, or
misshapen.
DO NOT attempt to disassemble any part of the radar module that has already been
mounted prior to shipping.
The radar module is a precision instrument. DO NOT squeeze, tap or hit.
If the radar module frequently detects obstacles incorrectly, rst check to make sure the
mounting bracket and the aircraft landing gear are properly secured. Second, perform the
IMU calibration. If this still doesn’t work, please contact DJI Support or a DJI Authorized
Dealer.
Keep the protective cover of the radar module clean. Clean the surface with a soft damp
cloth and air dry before using again.
Empty Tank
Prole