DJI Air 2S User Manual
©
2021 DJI All Rights Reserved.
41
Camera View
1. Flight Mode
N
: Displays the current ight mode.
2. System Status Bar
In Flight
: Indicates aircraft ight status and displays various warning messages.
3. Battery Information
80
24'26"
: Displays the current battery level and remaining ight time. Tap to view more information about
the battery.
4. Video Downlink Signal Strength
RC
: Displays the video downlink strength between the aircraft and remote controller.
5. Forward and Backward Vision Systems Status
: The top of the icon indicates the status of the Forward Vision System and the bottom of the icon
indicates the status of the Backward Vision System. The icon is white when the vision system is working
normally and red when the vision system is unavailable.
6. GNSS Status
20
: Displays the current GNSS signal strength. Tap to check the GNSS signal status. The Home Point can
be updated when the icon is white, which indicates the GNSS signal is strong.
7. System Settings
: Tap to view information about safety, control, and transmission.
Safety
Flight Assistance: The icon appears in the camera view after setting Obstacle Avoidance to Bypass or Break.
The aircraft cannot sense obstacles if Obstacle Avoidance is disabled. The aircraft cannot y left or right if
Sideways Flight is disabled.
Flight Protection: Tap to set the max altitude, max distance, Auto RTH altitude, and to update the Home
Point.
Sensors: Tap to view the IMU and compass status and start to calibrate if necessary. Users can also check
the auxiliary bottom light and unlock GEO zone settings.
Battery: Tap to view the battery information such as battery cell status, serial number, times charged, and
production date.
Auxiliary LED: Tap to set the auxiliary LED to auto, on, or o.
Unlock GEO Zone: Tap to view the information about unlocking GEO zones.
80
23 26
20
1x
AF
N
In Flight
1 2 43 65 7
14 1315
16
17
18
8
9
10
11
12
To Next Page
Loading...
