DJI Air 2S User Manual
©
2021 DJI All Rights Reserved.
7
Unfold the front arms before unfolding the rear arms.
Make sure the gimbal protector is removed and all arms are unfolded before powering on the
aircraft. Otherwise, it may affect the aircraft self-diagnostics.
Preparing the Remote Controller
1. Remove the control sticks from their storage slots on the remote controller and screw them into
place.
2. Pull out the mobile device holder. Choose an appropriate remote controller cable based on the type
of mobile device. A Lightning connector cable, Micro USB cable, and USB-C cable are included in
the packaging. Connect the end of the cable with the phone icon to your mobile device. Make sure
the mobile device is secured.
4. All Intelligent Flight Batteries are in hibernation mode before delivery to ensure safety. Use the
provided charger to charge and activate the Intelligent Flight Batteries for the first time. It takes
approximately 1 hour and 35 minutes to fully charge an Intelligent Flight Battery.
B
BA
A
2
1
2
1
To Next Page
Loading...
