15
2.2.7 Charging and fitting Batteries (Refuelling)
The batteries will be charged after every use using the DJI official charger and their charge
status will be recorded in a battery log after every flight/charging by the RPAS CDR. Battery
integrity and condition will be assessed prior to and after every use.
Prior to use the Technical Manager will oversee the charging and discharging of batteries in
a safe environment. Defects and battery information will be logged and dealt with.
If batteries require charging on-site then a charging area will be selected and cordoned off
from the public. Fire and safety equipment will be positioned nearby.
2.2.8 Loading of Equipment
The current UAV is a fully integrated system. Additional equipment will not be added to the
UAV. Future models will always be balanced and checked by the PIC. This will be included
in future amendments to this document.
2.2.9 Preflight Checks
Preflight checks are done as per the Embarkation Checklist.
2.2.10 Preparation and Correct Assembly of the Drone
The PIC will assemble the aircraft as per the Embarkation Checklist and the Manufacturers
Instructions (See APPENDIX G - Inspire _1_User_Manual__V1.8)