dji Inspire 1 - Used with the DJI Focus

©
2016 DJI. All Rights Reserved.
37
User Manual
INSPIRE RAW
Used with the DJI Focus
DJI Focus is fully compatible with the Zenmuse X5R series gimbal and camera. No calibration is required
when using the Focus with the Zenmuse X5R camera.
Connection
To allow communication between the two devices, connect the communication port on the Focus remote
controller to the CAN Bus port on the Inspire 1 remote controller using the dedicated CAN Bus cable.
Ensure that the Zenmuse X5R camera is set in AF mode.
Refer to "DJI FOCUS User Manual" for more information.