dji Inspire 1 - Post-Processing Workflow

©
2016 DJI. All Rights Reserved.
53
User Manual
INSPIRE RAW
Accessing your Files
1. Power off the Zenmuse X5R. While holding down the X5R SSD Release Button, remove the X5R SSD.
2. Insert the X5R SSD into the X5R Reader.
3. Connect the X5 Reader to your computer with a USB cable.
4. Launch DJI CineLight.
Post-Processing with DJI CineLight
Using DJI CineLight, you can import Adobe DNG les on the X5R SSD or your computer, add effects and
enhancements, and then export them as a DNG sequence or high quality QuickTime video.
[1]
[2]
[3]
[4]
[5][6]
[7] [8] [9] [10] [11][12]
[13]
[14]
[15]
[16]
[17]
●
dng2号
00：01.53
Movie Clips
Libraries
●
DJI201023
Free:299.37 GB / Total:476.21GB
●
Local Library
Total:30 clips
●
TooFsat
00：02.53
●
TooFsat
00：02.53
●
A00_C01
00：00.03
SELECTION
DJI_A000121_23_20160301
FRAME SKIP
00:00.00 / 00:00.10
Power LED Working Status LED
Off
The X5R READER does not have power. / The X5R SSD is
not inserted.
Off Idle.
Solid
Blue
The X5R READER is powered on and the X5R SSD is
inserted correctly.
Blinking
Blue
Read and write
in progress.