dji INSPIRE 2 - Page 83

7
EN
2 3
1
11
2
3
7. Prepare the Aircraft
Press the power button a
NJOJNVNPGmWFUJNFT
Unfold the landing gear to Landing
Mode and power on
Keep your hands away from the transformation mechanism when unfolding the landing gear.
 1SFTTUIFQPXFSCVUUPOBUMFBTUmWFUJNFTDBOUSBOTGPSNUIFBJSDSBGUUP5SBWFM.PEFBHBJO
Make sure to press the battery remove button when removing the battery.
Insert the battery pair
8. Mount the Gimbal and Camera
Press the gimbal
detach button to
remove the cover.
Align the white and
red dots and insert the
gimbal.
Rotate the gimbal lock
to the locked position.
Always power off the aircraft before removing the gimbal. Be sure to remove the gimbal before transforming the aircraft to Travel
Mode.
Make sure to press down the gimbal detach button when rotating the gimbal lock to remove the gimbal and camera. The gimbal
lock should be fully rotated when removing the gimbal for the next installation.
9. Prepare for Takeoff
Pair the propellers and
motors with arrows of
the same color (red or
white).
Press down the spring pad
and rotate the propeller lock
until the arrows are aligned
and you hear a click.
Attach the propeller
onto the motor.
Again, rotate the
propeller lock until
you hear a click.
5PHHMFUIFnJHIUNPEF
switch to the safest P-mode.
Connect your mobile device. Power on the remote controller
and the aircraft.
Launch the
%+*(0BQQBOE
UBQ(0'-:
Make sure to press down the shrapnel before rotating the propeller lock.
%+*(0
App
5x