To Next Page

To Previous Page

DJI OM 5

User Manual

Charging Port (USB-C)

Charge DJI OM 5 by connecting a USB adapter to this port.

1/4”-20 UNC Port

The 1/4"-20 UNC port can be used to attach a tripod.

M3×0.5 Screw Hole

Used to mount counterweights. Counterweights should be used if a camera

lens or microphone is mounted on the mobile phone. Make sure the total

weight of these accessories is less than 290 g.

Lanyard Hole

The lanyard hole can be used to attach a wrist strap.

Combination Operation

The Bluetooth connection can be reset if DJI OM 5 cannot be connected or found. Press

the switch button, shutter/record button, and trigger simultaneously to reset the Bluetooth

connection. The Bluetooth connection is reset successfully when the system status indicator

turns from green to yellow. Search DJI OM 5 and reconnect.

DJI OM 5 will be powered off automatically if there is no operation for three minutes in

standby mode.

Questions and Answers:

Need help?

Do you have a question about the dji OM 5 and is the answer not in the manual?

dji OM 5 Specifications

General

Bluetooth	Yes
Bluetooth version	5.0
Type	Smartphone camera stabilizer
Material	-
Mounting	1/4\
Product color	Gray
Maximum device depth	10 mm
Maximum device width	84 mm
Minimum device depth	6.9 mm
Minimum device width	67 mm
Charging time	1.5 h
Operating time	6.4 h
Battery voltage	8.8 V
Battery capacity	1000 mAh
Operating temperature (T-T)	0 - 40 °C
Mechanical pan range	-161.12 - 172.08 °
Mechanical roll range	-127.05 - 208.95 °
Mechanical tilt range	-101.46 - 229.54 °