To Next Page

To Previous Page

Using DJI OM 5

After powering on, DJI OM 5 will enter follow mode by default. The gimbal converts joystick

movements into smooth pan and tilt transitions, and reduces the impact of natural vibrations.

The mobile phone can by adjusted by hand as well.

Button and Port Functions

M Button

When Powered off

Press once: check battery level.

Press and hold: power on.

When Powered on

Press once: switch between photo or video mode (by default) or enter quick

settings (function set in DJI Mimo).

Press twice: enter standby mode (press any button to exit).

Press four times: switch between FPV and follow mode.

Press and hold: power off.

Joystick

Move vertically to tilt the mobile phone. Move horizontally to pan the mobile

phone. The joystick control direction can be set in DJI Mimo. The feature of

joystick also can be set to switch quick settings.

Shutter/Record Button

Press once: take a photo or start or stop recording.

Press and hold: for burst shooting when in photo mode.

Zoom Slider

Move the slider to the + position to enlarge the subject and move the slider to

the - position to shrink. Push the slider once to change the zoom once. Push

the slider continuously to change the zoom continuously.

Switch Button

Press once: switch between front and back cameras.

Press twice: switch between landscape and portrait mode.

Questions and Answers:

Need help?

Do you have a question about the dji OM 5 and is the answer not in the manual?

dji OM 5 Specifications

General

Bluetooth	Yes
Bluetooth version	5.0
Type	Smartphone camera stabilizer
Material	-
Mounting	1/4\
Product color	Gray
Maximum device depth	10 mm
Maximum device width	84 mm
Minimum device depth	6.9 mm
Minimum device width	67 mm
Charging time	1.5 h
Operating time	6.4 h
Battery voltage	8.8 V
Battery capacity	1000 mAh
Operating temperature (T-T)	0 - 40 °C
Mechanical pan range	-161.12 - 172.08 °
Mechanical roll range	-127.05 - 208.95 °
Mechanical tilt range	-101.46 - 229.54 °