dji Osmo Action GPS - Charging the Battery; Status LED

9
EN
Dashboard
Thebuilt-insatellitepositioningmodulesenableuserstorecordtnessdataaccuratelywhen
shooting. When used with DJI Mimo, users can add a host of collected data to enrich the video,
such as speed, route, direction, and elevation.
• Makesuretousetheremotecontrollerinanopenoutdoorenvironmenttoavoidsignal
interferenceandwait1-2minutesuntiltheGPSsignalisstrong.Makesuretheremote
controllerfacesupwardfortheoptimalGPSsignal.DONOTblockthetopoftheremote
controllerwithyourhandsorotherobjects.
• The remote controller does not have a GPS signal underwater. DO NOT use the remote
controller underwater.
Charging the Battery
Connect the remote controller to a charger via the USB-C port.
Status LED
Status Indicator Descriptions
Charging Status When Powered O
Solidgreenfor6secondsandturnso Charging completed
Blinksgreenfourtimes Charging,76%-100%
Blinksgreenthreetimes Charging,51%-75%
Status LED