©
2016 DJI All Rights Reserved.
19
OSMO+ User Manual
Deadband: A larger deadband requires more pan/tilt handle movement to translate into
gimbal motion.
Acceleration: Determines how closely the camera will follow the translated pan/tilt
handle movement.
• Joystick Settings
Smoothing: Controls the deceleration of the gimbal. A small value will cause the gimbal
to stop abruptly.
Speed: Controls the movement speed of the tilt and pan axes when controlled by the
joystick.
Control Direction: The Osmo+'s tilt and pan axis can be controlled simultaneously by
setting joystick control direction to Free.
Invert Joystick Left/Right Operation: Inverts left and right joystick directions, so that
pushing right turns the phone left andvice versa.
Invert Joystick Up/Down Operation: Invert up and down joystick directions, so that
pushing the joystick up tilts the phone down.
• Horizontal Calibration
You may have to calibrate the roll axis if the camera’s horizon level is not perfectly level
by setting a positive or negative value.
• Auto Calibration
Reduces the drift caused by magnetic interference in the surroundings or human error.
Hold the Osmo+ still and upright during the calibration.
• Reset Gimbal
Tap to reset the gimbal to the default settings.
General Settings
Here you can change the Wi-Fi password, clear the video cache.
Livestream
Livestream to YouTube Live.
[11] :
Gimbal Functions
Scene Mode: SmoothTrack speed varies depending on the Scene Mode. In Sport Mode,
it moves faster, while in Walk Mode it is slower.
When using the Osmo's Wear Mode with the Osmo+, vertical movements created by
wearing the Osmo are minimized.
Tap to recenter the camera.
Tap enable Lock Mode.
Tap
to enter Sele Mode.
Tilt Axis Lock: Locks the tilt axis at the current angle when enabled.
Zoom Adjusted SmoothTrack: After enabling this function, SmoothTrack speed will auto
To Next Page
Loading...
Need help?
General
Weight and Dimensions
