Purchase the DJI Phantom 4 RTK w/ RTK-2 Mobile Station Combo at www.tigersupplies.com.
How is the Phantom 4 RTK camera calibrated? Each Phantom 4 RTK camera goes through
a calibration process that measures the distortions of the lens, and records the
Corresponding undistort parameters in XMP DewarpData. When the “distortion correction” is
switched off, the original image with distortion will be generated. When the “distortion
correction” is switched on, the parameters used to eliminate distortion is not the parameters
calibrated, but the design parameters of the camera. When eliminating the distortions, it is
not done pixel by pixel.
What are the highlight features for the standard remote controller of the Phantom 4
RTK?
1. Built-in 5.5-inch display, 1080P, up to 1000 nits brightness. You can see the screen in
strong sunlight. The controller can work in low temperatures.
2. Supports hot swappable batteries.
3. Pre-installed GS RTK App can run Photogrammetry, Waypoint and other mission
types.
4. OcuSync video transmission.
How can I switch between FCC and CE modes? FCC and CE mode switching is not
available.
Can I connect the Phantom 4 RTK to other Phantom series controllers? No.
What is the video transmission distance of the Phantom 4 RTK? The effective video
transmission distance depends on your method of operation (such as the antenna position)
and actual flight environment. In an open and unobscured environment, the maximum
distance is 7 km when FCC compliant, and 5 km when CE compliant. (2.4 GHz).
What should I do if the app sends me the following notification: "the remote controller
signal is weak, please adjust the antenna"? This means that improper antenna positioning
is likely affecting the video transmission signal, and therefore the quality of the real-time view.
You can try to adjust the antennas so the flat sides of the antenna point towards the Phantom
4 RTK.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
