dji Phantom 4 RTK Disclaimer And Safety Guidelines

©
2018 DJI All Rights Reserved.
9
DJI GS RTK App
1. Be sure to fully charge the remote controller before launching the DJI GS RTK app.
2. Read all prompted safety tips, warning messages, and disclaimers carefully. Be familiar with the related
regulations in your area. You are solely responsible for being aware of all relevant regulations and ying
in a way that is compliant.
a. Using the Auto-take off and Auto-landing features.
b. Setting the altitude beyond the default limit.
3. Land your aircraft immediately if there is an alert shown in the app.
4. Examine and check all warning messages on the Aircraft Status List displayed in the app prior to each
ight.
5. Cache the map data of the area where you intend to y the aircraft by connecting to the Internet before
each ight.
6. The app is designed to assist your operation. Please use your sound discretion and DO NOT rely on the
app to control your aircraft.
7. Your use of the app is subject to the DJI GS RTK app Terms of Use and DJI Privacy Policy. Please read
them carefully in the app.
Dongle
1. A dongle and SIM card are required for some product features in the DJI GS RTK app and users will
bear the cost of these extras.
2. Be sure to use a DJI approved dongle.
3. Use the dongle and the SIM card according to their manuals.
4. DJI accepts no liability for accidents caused by the loss of user data or aircraft malfunctions originating
from third party dongles and SIM cards.
5. Only use SIM cards that are compatible with the dongle.
6. Make sure you mount the dongle and the SIM card correctly, or else related functions will not be
available.
Firmware
To avoid serious injury to children and animals, observe the following rule:
1.
Keep children and animals at a safe distance during any rmware upgrade, system calibration, and
parameter setting procedures.
1. For safety, always update the rmware to the latest version when an upgrade notication is shown in the app.
2. Only use ofcial DJI rmware.
3. Be sure to update the remote controller's rmware to the latest version after you update the aircraft's rmware.
4. The remote controller may become unlinked from the aircraft after updating. Re-link the remote controller and
aircraft.
5. Be sure to check all connections and remove the propellers from the motors before performing the firmware
update.

dji Phantom 4 RTK Specifications

General

Type	Quadcopter
Product color	White
Construction type	Ready-to-fly (RTF)
Suitable for outdoor use	Yes
Maximum speed	16.1 m/s
Frequency band	2.4 - 2.483 GHz
Number of rotors	- rotors
Maximum flight time	30 min
Maximum ascent speed	6 m/s
Maximum descent speed	3 m/s
Maximum weight capacity	- kg
Horizontal hover accuracy	0.1 m
Maximum operating distance	- m
Megapixel	20 MP
Sensor type	CMOS
Maximum frame rate	30 fps
Camera shutter speed	8 - 1/8000 s
Image formats supported	JPEG
Video formats supported	H.264
Maximum image resolution	5472 x 3648 pixels
Maximum video resolution	3840 x 2160 pixels
Field of view (FOV) angle	84 °
Built-in processor	-
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Number of waypoints	199
Moving control functions	Downward, Forward
Operating frequency	2400 - 2483/5725 - 5850 MHz
Battery voltage	15.2 V
Battery capacity	5870 mAh
Transmitter battery capacity	6000 mAh
Output power	160 W
Operating temperature (T-T)	0 - 40 °C
Cables included	AC, Micro-USB, USB Type-C
Memory card included	MicroSD
Included memory card size	16 GB

Weight and Dimensions

Battery weight	468 g