dji RC-N3 - 8 Appendix; Specifications; DJI RC-N3 Remote Controller; Firmware Update

8 Appendix
8.1 Specications
DJI RC-N3 Remote Controller
Max Operating Time Without Charging Any Mobile Device: 3.5 hours
When Charging a Mobile Device: 1.5 hours
Operating Temperature -10° to 40° C (14° to 104° F)
Charging Temperature 5° to 40° C (14° to 104° F)
Charging Time 2 hours
Charging Type 5 V, 2 A
Battery Capacity 2600 mAh
Weight Approx. 320 g
Dimensions 104.2×150×45.2 mm (L×W×H)
Operating Frequency
[1]
2.400-2.4835 GHz
5.170-5.250 GHz
5.725-5.850 GHz
Transmitter Power
(EIRP)
2.4 GHz:
< 33 dBm (FCC)
< 20 dBm (CE/SRRC/MIC)
5.1 GHz:
< 23 dBm (CE)
5.8 GHz:
< 33 dBm (FCC)
< 14 dBm (CE)
< 30 dBm (SRRC)
[1] Operating frequency allowed varies among countries and regions. Please refer to local laws and
regulations for more information.
8.2 Firmware Update
Use DJI Fly or DJI Assistant 2 (Consumer Drones Series) to update the device.
Using DJI Fly
When using the remote controller, connect the aircraft and remote controller, and run
DJI Fly. You will be notied if a new rmware update is available. Follow the on-screen
instructions to start the update. Note that you cannot update the rmware if the remote
DJI RC-N3 User Manual
16 © 2024 DJI All Rights Reserved.