dji RC-N3 - Aftersales Information

controller is not linked to the aircraft. An internet connection is required during the
rmware update.
Using DJI Assistant 2 (Consumer Drones Series)
Use DJI Assistant 2 (Consumer Drones Series) to update all your devices separately.
1. Power on the device. Connect the device to a computer with a USB-C cable.
2. Launch DJI Assistant 2 (Consumer Drones Series) and log in with your DJI account.
3. Select the device and click Firmware Update on the left side of the screen.
4. Select the rmware version.
5. Wait for the rmware to download. The rmware update will start automatically. Wait
for the rmware update to complete.
• Make sure to follow all the steps to update the rmware, otherwise the update
may fail.
• Make sure the computer is connected to the internet during the update.
• DO NOT unplug the USB-C cable during an update.
• Before performing an update, make sure that the device is at least 20% charged.
8.3 Aftersales Information
Visit https://www.dji.com/support to learn more about aftersales service policies, repair
services, and support.
DJI RC-N3 User Manual
© 2024 DJI All Rights Reserved. 17