dji RC-N3 - 4 Operations; Powering On;Off; Charging the Battery; Controlling the Aircraft

4 Operations
4.1 Powering On/O
Press the power button once to check the current battery level.
Press, then press and hold to power the remote controller on or o.
4.2 Charging the Battery
Connect the charger to the USB-C port on the remote controller.
• Fully charge the remote controller before each ight. The remote controller
sounds an alert when the battery level is low.
• Fully charge the battery at least once every three months to maintain the
battery’s health.
4.3 Controlling the Aircraft
The control sticks of the remote controller can be used to control the aircraft movements.
The control sticks can be operated in Mode 1, Mode 2, or Mode 3, as shown below.
DJI RC-N3 User Manual
8 © 2024 DJI All Rights Reserved.