Ronin-S
User Manual
10
©
2019 DJI OSMO All Rights Reserved.
Balancing the Pan Axis
1. Grab the grip and tilt Ronin-S sideways to check for movement along the pan axis.
2. Loosen the knob
1
on the pan motor. Adjust the camera balance
2
until the camera
stays still when rotating the pan axis 45° while lifting the grip.
3. Tighten the knob.
1
2
The knobs on the gimbal can be pulled outwards and repositioned if the knob
rotation is hindered.
It is necessary to use optional Counterweights if mounting a longer camera
system. Visit the official DJI Online Store to learn more.
To Next Page
Loading...
