©
2019 DJI OSMO All Rights Reserved.
15
Activating Ronin-S
Make sure the camera is balanced before powering on Ronin-S. Do not turn on Ronin-S
without a balanced load, as doing so may damage the gimbal motors.
1. Press the power button once to turn on the grip, and then press and hold the gimbal
power button to turn on the gimbal.
2. Enable Bluetooth on your mobile device and launch the Ronin app. Select Ronin-S
and input the default Bluetooth password 12345678 once it's detected.
3. Make sure you are connected to the internet and follow the on-screen instructions to
activate Ronin-S for the first time.
4. After activation, double tap the gimbal power button to engage the motors before
proceeding.
Operation
Ronin App Settings
After balancing and powering on Ronin-S, you can adjust gimbal settings through the
Ronin App. The screenshots shown below are based on the iOS version.
To Next Page
Loading...
