dji Ronin-S - Gimbal Operation Modes

©
2019 DJI OSMO All Rights Reserved.
29
Roll360
is available when using the Ronin-S in Flashlight mode. Thanks to the slip-ring on
the Pan axis, the Ronin-S is capable of performing a continuous roll rotation.
To set up the Ronin-S for Roll 360, first you need to connect to Ronin-S with the Ronin
App. Next go to the Channels setting page (under Configuration > Control Settings >
Channels) and re-map CH3 to the Roll axis (originally mapped as Pan axis) and also set
the CH1 as N/A to avoid any input on the Tilt axis. Then hold the Ronin-S in the Flashlight
mode and double tap the front trigger to re-center the gimbal orientation. Simply push the
joystick left or right to get the gimbal rolling continuously.
Operation Modes
There are three operation modes for the Ronin-S: Upright mode, Underslung mode and
Flashlight mode.