Ronin-S
User Manual
16
©
2019 DJI OSMO All Rights Reserved.
Top Bar
Sleep/Wake: Tap to enter or exit sleep mode. When Ronin-S is in sleep mode, the motor
will be powered off, but the gimbal remains powered on.
M1: Displays the current user profile .
Battery Level: Displays the battery level of the gimbal.
About
Settings: View your account and the quick start guide.
Device List: Displays the device name and password.
Firmware: Displays the firmware version.
Academy
Watch the tutorials and read the manual documents.
Create
Virtual Joystick
Use the virtual joystick in the app to control the movement of the gimbal and to shoot.
1. Control Dial: Control the max speed and smoothing of the gimbal by adjusting the
control dial. Max speed allows you to adjust the remote-controlled rotational speed. The
smoothing allows you to control the sensitivity of the gimbal. The lower the smoothing
value, the more sensitive the movement of the gimbal.
2. Roll Stick: Control the roll axis movement of the gimbal using the virtual joystick.
3. Pan/Tilt Stick: Control the pan and tilt axis movement of the gimbal using the virtual
joystick.
4. Shoot/Record Button: Tap to start take photos or record video.
5. Photo/Video Toggle: Tap to switch between photo and video modes. Make sure the
mode is the same as the settings on the camera.
6. Recenter: Tap to recenter the gimbal.
1
2
3
4
5
6
To Next Page
Loading...
