dji Zenmuse H3-3D User Manual

4
©
2014 DJI. All Rights Reserved.
Prole
The Zenmuse H3-3D gimbal offers excellent stabilization features for aerial hobbyists and
professional aerial photographers. Powered by a built-in IMU (Inertial Measurement Unit) and
a special servo module, this gimbal is built to hold a GoPro camera and enables stable, quality
aerial photography.
In The Box
Gimbal ×1
Built-in servos and a stand-alone IMU provide yaw, roll,
and tilt stabilization. An integrated bottom damping plate
minimizes installation time.
Gimbal Controller Unit (GCU) × 1
Connect the Gimbal Controller Unit to your flight control
system using CAN-Bus. Power the GCU and gimbal through
a 3S~6S power cable.
Damping Unit × 1
The upper plate of the damping unit is used to connect the
gimbal to your aircraft. Pre-installed vibration absorbers
greatly reduce vibrations.
Accessories Pack – Spare Vibration Absorbers × 4
Spare vibration absorbers for the damping unit. Use one set
at a time.
Accessories Pack – Anti-drop Kit × 4
Spare anti-drop kits that are used to secure the upper and
bottom plates of the damping unit.
Prole

dji Zenmuse H3-3D Specifications

General

Brand	dji
Model	Zenmuse H3-3D
Category	Drones
Language	English