11
EN
target, the total laser transmitter power is split and the achieveable range is reduced.
[2] The accuracy was measured under the following conditions in a DJI laboratory environment:
using an Area Route mission with Calibrate IMU enabled in DJI Pilot 2, and using repetitive
scanning with the RTK in the FIX status. The relative altitude was set to 150 m, flight speed to
15 m/s, gimbal pitch to -90°, and each straight segment of the flight route was less than 1500 m.
Choose objects with obvious angular features for data collection. DJI Terra was used for post-
processing with Optimize Point Cloud Accuracy enabled. If not enabled, the vertical accuracy is
4 cm and the horizontal accuracy is 8 cm.
[3] Measured in an environment of 25° C (77° F) with a target of 80% reflectivity at a distance of
150 m. The actual environment may differ from the testing environment. The figure listed is
for reference only.
To Next Page
Loading...
