Calling presets
During radio operation, press the STATION +/- keys in order to call saved stations.
RDS function
Your AV-receiver is equipped with the following functions:
—
PS (Programme Service):
If you receive a RDS-channel, after some time, the name of the station is shown in the
display. You can also press the DISPLAY key of the remote control repeatedly until
--PS--
is flashing in the display. After some seconds, the name of the station is shown.
—
PTY (Programme Type):
If you receive a RDS-channel, you can press the DISPLAY key of the remote control re
-
peatedly until
--PTY--
is flashing in the display. After some seconds, the programme type of the set station is
shown. The abbreviations stand for the following programme contents:
NEWS Finance
AFFAIRS Children
INFO Social
SPORT Religion
EDUCATE Phone In
DRAMA Travel
CULTURE Leisure
SCIENCE Jazz
VARIED Country
POP M Nation M
ROCK M Oldies
EASY M Folk M
LIGHT M Document
CLASSIC Test
OTHER M Alarm
!
Weather
—
CT (Clock Time) - Time information:
If you receive a RDS-channel, you can press the DISPLAY key of the remote control re
-
peatedly until
- - WAIT CT - -
is flashing in the display. After some seconds, the time transmitted by the radio station is
shown. The reason for a possible delay in the display of the time may be the fact that this
signal is only transmitted one time per minute.
—
RT (Radio Text):
If you receive a RDS-channel, you can press the DISPLAY key of the remote control re
-
peatedly until
--RT--
is flashing in the display. After some seconds, a short text message from the station is
shown, if that station offers this service.
24
To Next Page
Loading...
