6 CONTENTS
4.3.1.1 Locating IP settings
In Windows, the first step is locating the network adapter TCP/IP properties. The procedure differs for each Windows
version:
Windows XP, 2000, 2003:
• Open Start / Control Panel / Network Connections.
• In "classic view", select Start / Settings / Control Panel /Network Connections.
• Right-click on Local Area Network Connection and select Properties.
• Proceed to step 2.
Windows Vista:
• Open Start, right click on Network, then on Properties.
• Double click Network and Sharing Center.
• Click Manage Network Connections. A Network Connections window appears.
• Right click on the network connection to the switch, i.e. Local Area Network.
• Proceed to step 2. Windows 7:
• Open the Start orb, click on Control Panel.
• Click View Network Status and Tasks, then Change Adapter Settings.
• Proceed to step 2
Windows 8:
• Mouse or swipe to the bottom right corner and select Settings.
• Select Control Panel.
• Select Network and Sharing Center.
• Change Adapter Settings.
• Right click on your connected network and select Properties.
• Proceed to step 2
4.3.1.2 Configuring static IP
The second step is adding an IP such as 192.168.0.50. Temporarily disable DHCP while configuring the switch.
• Select Internet Protocol TCP/IP V4 Properties and click Properties.
• Enter a compatible static IP such as 192.168.0.50.
• Click Apply and close windows.
• Ping the power switch to confirm the connection.
• Point your browser to 192.168.0.100
• Log in.
Detailed instructions are at http://digital-loggers.com/ip_setup.html
DLI DIN4 User’s Guide: 20170809T111540Z
To Next Page
Loading...