DLS CCi2 User Manual (English)

To Next Page

How to install and operate the

DLS amplifier models

Welcome!

This owners manual is written in easy english and

uses a lot of drawings to simply the installation and

use of the above amplifiers.

Your DLS amplifiers must be installed correctly in

order to work well. This manual will show you how

to install the amplifier like a pro. Please read the

entire manual before beginning the installation.

Install the amplifier yourself if you feel confident

with our instructions and if you have the proper tools.

However if you feel unsure, turn over the installation

job to someone better suited to it.

Warranty Service

This amplifier is covered by warranty, depending on

the conditions in the country where it is sold. If the

amplifier is returned for service, please include the

original dated receipt with the product.

Contents

Features…………………………….............. 2

Installation…………………….……............. 2

Routing Wires……………………................ 2

Tools and materials needed………............. 3

Wiring & crossovers:

Power and remote wiring............................. 3-4

Low & High level input wiring ...................... 4

Input level control, BASS EQ, etc ............... 5

Features on each model ............................. 5

CCi500 / CCI500-40 speaker wiring:

One or more subwoofers............................... 6

CCi2 speaker wiring:

Front speakers…...………………................ 7

Subwoofer…………………………............... 7

CCi4 / CCi44 / CCI44-40 speaker wiring:

Four speakers……………………................ 8

Two speakers and bridged subwoofer........ 8

Two subwoofers or a stereo speaker pair

connected in bridge mode ......................... 9

Testing………………………………............ 10

Troubleshooting……………………............ 10

Professional tips………………….........….. 11

Specifications………………………............ 12

Technical Assistance

For technical assistance ask the shop where the

product was sold or the distributor in your very

country. Information can also be found on our WEB-

site www.dls.se

We follow a policy of continuous advancement in

development. For this reason all or part of specifica

tions & designs may be changed without prior notice.

This product must be returned to the

separate collection system for electronic

products. Do not dispose this product

together with general household waste.

DECLARATION OF CONFORMITY

DLS amplifiers for vehicles are manufactured in

accordance with the EU directive EEC 95/54 (72/245/

EEC) and are marked with the approval number.

They are also marked in accordance with the WEEE-

directive 2002/96/EC.

The products are also produced in accordance with

the EU RoHS directive 2002/95/EC.

CCi2 / CCi4

CCi44 / CCi44-40

CCi500 / CCi500-40

Sound tuned in England.

Modied 2021-12-20

Winn Scandinavia AB

Elementvägen 15 - SE-702 27 Örebro - Sweden

Tel: +46 19 20 67 65 - E-mail: info@dls.se

www.dls.se

DLS amplifiers are engineered by DLS Sweden,

a part of:

Need help?

Do you have a question about the DLS CCi2 and is the answer not in the manual?

CCi500 / CCi500-40

Power Output

power output RMS, 1 ohm	500 W
power output RMS, 2 ohm	400 W
power output RMS, 4 ohm	250 W

Audio Specifications

signal to noise ratio, A-weighted	97 dB
damping factor	140
frequency response	10 Hz - 500 Hz

Input and Sensitivity

input impedance, low level	22 kohm
input sensitivity	1 - 4V
input impedance, high level	45 ohm

Power Consumption

power consumption, idle	0, 6 A
power consumption, max	80A
fuse	60 A

Dimensions and Weight

dimensions (mm)	51 x 129 x 320
dimensions (inch)	2 x 5, 1 x 12, 6
weight	2, 4 kg

CCi2 CCi4 CCi44 / CCi44-40

Power Output

power output RMS in 4 ohm	2 x 110 W 4 x 50 W 4 x 85 W
power output RMS in 2 ohm	2 x 170 W 4 x 70 W 4 x 110 W
power output RMS 4 ohm bridged	1 x 340 W 2 x 140 W 2 x 220 W

Audio Specifications

signal to noise ratio, A-weighted	110 dB
damping factor	>150 >250 >300
frequency response	10 Hz - 50 kHz 10 Hz - 55 kHz 10 Hz - 60 kHz

Input and Sensitivity

input impedance, low level	6 kohm 6 kohm 5 kohm
input sensitivity	1 - 4V 1 - 4V 1 - 4 V
input impedance, high level	45 ohm

Power Consumption

power consumption, idle	0, 5 A 0, 5 A 0, 7 A
power consumption, max	43A 40A 64 A
fuse	40 A 40 A 60 A

Dimensions and Weight

dimensions (mm)	51 x 129 x 260 51 x 129 x 260 55 x 129 x 320
dimensions (inch)	2 x 5, 1 x 10, 2 2 x 5, 1 x 10, 2 2, 2 x 5, 1 x 12, 6
weight	1, 87 kg 1, 8 kg 2, 4 kg

View in Manual