- 25 -
English
Replace the battery
The WT200 has an rechargeable NiMH. If it is necessary to replace the
battery, proceed as follows:
Power off the unit.
Pull the belt clip latch away from the unit and push up on the belt clip
to remove it. During installation a click indicates that the belt clip is
locked.
Slide down the battery cover.
Insert the battery pack.
Close the battery cover.
Use only the original battery pack.
In case you do not know clearly how to proceed, please ask
your authorised dealer.
If the unit is not used for a long period of time e.g several
weeks, please take out the battery. Otherwise it will erode
and damage the battery.
Getting started
To Next Page
Loading...