DNT wt200 - General Operation; Turn the Radio on; Turn the Radio off; Transmitting

- 27 -
English
Turn the radio on
To switch the radio on, press the On/Off button for 3 seconds until the dis-
play shows ON and all icons and a tone is heard. After half a second the
display changes to normal mode. At normal mode the channel, CTCSS ,
volume level and battery icon.
Turn the radio off
To switch the radio off, press the On/Off button for 3 seconds, until the
display shows of and then turns off.
General
All settings made in the Menü are stored and the radio
returns to standard mode if no button is pressed within 3
seconds.
Don’t touch the antenna during transmission, to avoid mal-
function of the radio.
Transmitting
To transmit, press and hold the PTT (PUSH-TO-TALK) button and speak
with a normal voice from a distance of 5-8 cm away from the microphone.
The TX icon is on while transmitting. Release the PTT button at the end
of transmission.
VOX / HANDS-FREE OPERATION
VOX allows to switch automatically between transmitting and re-
ceiving by voice operation. The Radio has a built-in Voice Activated
Circuit(VOX)function,You can connect the radio with the earphone for
hands-free talking and listening without pressing PTT button.
Getting started