DNT wt200 - Call-Ring Tone; Rogerbeep; Key Tone

- 29 -
English
Call-Ring tone
You can use call tones to get the attention of other people with radios on
the same channel and CTCSS tone. You can also use call tones as the
signal of the start or end of a transmission.
Press CALL button the LCD display TX icon and your call tone will be
transmitted to nearby receivers set at the same channel. The call tones
have 5 kinds of sound for personal selection.
Select call tones
Press Menu button four times, LCD display CA icon and call tone
number will fl ash.
Press Up-/Down button to select your desired the call tone
Press the PTT button to confi rm.
Rogerbeep
The rogerbeep is a tone which is automatically transmitted whenever the
PTT button is released. This lets the other person know that you have
fi nished talking and you are now in receive mode.
Press Menu button four times, LCD display icon and ON or OFF.
Press Up-/Down button to select rogerbeep, the display shows ON, or
to deselect the rogerbeep, the display shows OF.
Press the PTT button to confi rm.
Key tone
This feature allows the handset to sound a confi rmation tone whenever
keys are pressed.
Press Menu button six times, LCD display icon and ON or OFF.
Press Up-/Down button to select the key tone, the display shows ON,
or to deselect the key tone, the display shows OF.
Press the PTT button to confi rm.
General operation