- 28 -
English
To enable VOX mode proceed as follows:
Press Menu button three times until LCD displays VOX icon and VOX
sensitivity digit display is fl ashing.
Press Up-/Down button to select 1, 2, 3 for low, medium & high
sensitivity. (0F is off)
After turn on VOX, you need to connect the earphone to use the
hands-free function. See below steps.
To turn off the VOX mode proceed as follows:
Press Menü / Lock button three times until LCD displays VOX icon
and VOX sensitivity digit display will fl ash.
Press Up-/Down button to select 0F to switch the VOX to off.
Press the PTT button to confi rm or wait about 3 seconds, the changes
will be stored automatically.
Transmitting VOX / HANDS-FREE
Press Power On/Off button to turn off the radio.
Plug the earphone into the earphone jack
Press Power On/Off button to turn on the radio, LCD display VOX
icon.
Set the earphone microphone close to your mouth (1~3 cm) and
speak into the microphone, the radio will transmit automatically.
Stop speaking, the radio will stop transmiting and go into receiving
status.
Adjust the volume to comfortable level if necessary.
You must turn off the unit before plug the earphone
in,otherwise the unit will keep on transmitting.
General operation
To Next Page
Loading...