- 26 -
English
Insert alkaline batteries
Wrong polarity of batteries can damage the two way radio.
Remove the belt clip and open the battery door. Insert the batteries under
consideration of the polarity and close the battery door.
Recharge the battery
When LCD display battery level is low, the battery needs charging with
the enclosed desktop charger. Charging takes about 10-12 hours.
Plug the adaptor into the desk top charger.
Place the radio into the charger.
During charging, the LED of the charger is on, the radio remains on.
Take the radio out if charging is fi nished.
Check battery condition
If the display showes the only 1 bar in the battery icon,the battery has to
be recharged.
External earset
Earsets can be connected to the radio on to Headset jack on the top of
the radio.
To avoid damage to the radio use only original dnt acces-
sories.
Turn off the radio before connecting external accessories.
Adjust the volume to a low level to avoid injuries by hearing
a loud signal.
Getting started
To Next Page
Loading...