G -Sensor
Measures shock forces. The settings from “low to high” determine the amount of force
needed to lock the file from being overwritten. Once the function is triggered, the current
recording video will be locked and the file will be saved in the “RO” directory.
Recommended setting: low.
Image Rotation
Rotates the recorded image 180º when dash cam is mounted on the dashboard instead of
windshield.
Parking Surveillance (Default: Off)
When function is enabled, dashboard camera will automatically switch to Parking
Surveillance if vehicle is stationary for over 10 minutes.
1. Automatically records a 15-second video when motion detected within view range of
camera.
2. Automatically records and locks a 1-minute video when excessive force of impact is
detected by G-sensor.
3. Unit will return to normal recording mode if vehicle moves continuously for 3 seconds or
longer.
Note:
Parking Surveillance requires consistent power supply via vehicle battery. (It is
recommended to use optional DOD DP4 kit equipped with low-voltage protection design to
prevent battery drainage.
Please ensure to enable G-sensor function in setting menu before switch to Parking
Surveillance. (G-sensor sensitivity Default: Medium)
Parking Surveillance will automatically shut down GPS locating, and will resume when
switched to normal recording mode.
To Next Page
Loading...
