ISO Stamp
On/Off
Default: On.
Set Time Zone
Sets the current time zone for GPS time and date calibration. Not the time zone must be
manually adjusted for daylight savings
Speed Units
Select metric or imperial units.
Path Analysis
Calculates the total distance, travel time, and average speed of your journey from the
beginning of your trip to the end (when camera is turned on to when turned off). If Path
Analysis is set to “on”, the results will be displayed when the unit is turned off.
Default: Off.
Driver Fatigue Warning
Sets a timed delay before showing a visible alert reminding the driver to take a break.
GPS Logging
On/Off.
Default: On.
Head Up Display
After a customized period of time a new screen will appear showing speed and direction. If
enabled, the GPS speed warning will appear on this screen.
Speed Warning
Shows a visual warning on the head-up display when the set speed has been exceeded.
Time-Lapse
The time-lapse function is used to create a sped-up video. When set, the camera will record
one frame every 200ms (milliseconds)/500ms/1 second/5 seconds.
Plate Stamp
Imprints a customized set of 8 digits to the recorded video. Add license plates or other
identifying features to watermark your video.
Password Settings
Set a password lock which will prevent files from being deleted or the settings changed on
the device.
Note: This does not prevent other users from extracting the memory card or changing the files. This feature
should be turned off during regular driving.
Speed Camera Warning
A beeping sound and on-screen icon to remind you of approaching fixed speed camera
locations. First warning at 400 meters (1/4 mile) and final warning at 200 meters (1/8 mile).
*This function is only supported in some specific regions.
To Next Page
Loading...
