1
INTRODUCTION
Thanks for choosing the DOD
®
Rubberneck Analog Delay pedal. The Rubberneck is an extensively featured
delay pedal which uses BBDs for up to 1.5 seconds of classic analog delay.
Rubberneck operates like a standard delay pedal but also includes some performance features not found
in other analog delay pedals. This includes ‘Rubbernecking’, a feature which allows the delay repeats to be
stretched or compressed in time; Repeats Oscillation, a feature that provides a secondary delay feedback
setting for creating momentary run away oscillation effects; and a Loop Send/Return jack for adding effects
to the delay feedback signal path.
The FOOTSWITCH input jack allows a DigiTech
®
FS3X Footswitch to be connected for hands-free control of
Rubbernecking, Modulation on/off, and Tap Tempo/Regen.
The Rubberneck Analog Delay pedal is all you need for that truly classic analog delay sound, with modern
feature enhancements to transport your delay effects into the future.
FEATURES
• Up to 1.5 Seconds of Delay Time
• Unique Rubberneck Time Stretching Feature
• Controls for Time, Repeats, Level, Mod Rate, Mod Depth, Gain, Tone, Rubberneck Rate, & Regen Adjust
• Tap Ratio Toggle Switch for Selecting Delay Feel
• Tails Switch
• Effect On/Off Footswitch (Also Enables the Rubbernecking Feature)
• Tempo/Regen Footswitch for Tap Tempo & Momentary Delay Feedback Changes
• 1/4” Mono Input & Output Jacks
• Footswitch Input Jack for Additional Hands-Free Control
• Loop Send/Return Jack for Adding Effects to the Feedback Path
• True Bypass
• 9VDC Operation (Optional Power Supply Required)
To Next Page
