12
Basic Camera Operation
Everyday Operation
Your dash camera will automatically turn on and start recording when it starts receiving
power. The camera will record over the oldest videos when the memory card is
full (loop recording) by default.
Continuously Powered Electrical Outlet
If your electrical outlet is always powered, the adapter must be manually removed to
shut down the camera. Alternatively, the camera may be left on while parked to capture
video while you are away.
This operation will slowly drain your vehicle’s battery and may eventually prevent
your vehicle from starting.
Manually Turning On / Off Your Camera
Press the power button [ ] to turn on/off your camera. Press the record/select
[ ] button to begin recording
To Next Page
Loading...
