Each mode has a unique set of settings. See the description below.
Video Recording Settings
There are two settings pages. Access the second page by pressing the menu button
[ ] twice. If you move the cursor before pressing the menu button, you must exit
and try again.
16
Camera Settings
First Video Settings Page
Date Stamp
Imprints the time and date on the recorded video.
Driver Fatigue Warning
Sets a timed delay before showing a visible alert
reminding the driver to take a break.
Exposure
Sets the brightness/darkness of the video. Video
too bright? Set between -1 to -3. Video Too Dark?
Set between +1 to +3
Recommended Setting: 0
GPS Speed Warning
Shows a visual warning on the Heads Up Display
when the set speed has been exceeded.
GPS Track
Turns on/off GPS tracking. If disabled your camera
will no longer measure your speed and position nor
synchronize the time/date with the atomic clock.
Password Settings
Set a password lock which will prevent files
from being deleted and the settings changed on the
device. Note: This does not prevent other
users from extracting the memory card or changing
the files
Plate Stamp
Imprints a customized set of up to 8 digits to the
recorded video. Add your license plates or other
identifying features to watermark your video.
Record Audio
Switches the microphone on or off. This can also be
changed during recording by pressing the
microphone button [ ].
Resolution
Changes the video resolution. Lower resolution
reduces file sizes and video quality.
Recommended setting:1080P FHD
To Next Page
Loading...
