SRT PERFORMANCE FEATURES
Driver Information Display (DID)
• The DID can be used to view or change the following SRT Performance Features. Push
the UP
or DOWN arrow button until SR T Performance displays in the DID, then
push the RIGHT
arrow button. Follow the prompts to view and set your desired
settings. Push the LEFT
arrow button to scroll back to a previous menu or sub menu.
SRT Performance Sub Menu Items
•
0-60 MPH (0-100 km/h) Duration
•
Current G-Force
•
0-100 MPH (0-161 km/h) Duration
•
Peak G-Force
•
1/8 Mile Duration
•
Lap Timer
•
1/4 Mile Duration
•
Lap History
•
Braking Distance
•
Top Speed
The following describes each feature and its operation:
0-60 MPH (0-100 km/h) Duration
When selected, this screen displays the time it takes for the vehicle to go from 0 to
60 MPH (0 to 100 km/h) within 10 seconds.
• The feature will “ready” when the vehicle speed is at 0 MPH (0 km/h). The word
“READY” will flash when conditions are met for the event to begin.
• Dashes will display if the vehicle fails to reach 60 MPH (100 km/h) in less then 10
seconds.
• The time will continue to display until the OK button is pushed.
• Pushing the OK button will clear the current run time and display the vehicle's best
0-60 MPH (0-100 km/h) time.
1 — DID Controls
SRT
149
To Next Page
Loading...
