EasyManua.ls Logo

Dodge 2016 Challenger - Fluids, Lubricants, and Genuine Parts - Srt

Dodge 2016 Challenger
244 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chassis 6.4L Manual Transmission
Component Fluid, Lubricant, or Genuine Part
Manual Transmission W e recommend you use MOPAR ATF+4 Automatic Trans-
mission Fluid.
Brake Master Cylinder W e recommend you use MOPAR DOT 3, SAE J1703. If
DOT 3 brake fluid is not available, then DOT 4 is accept-
able.
Rear Axle W e recommend you use MOPAR LSD Synthetic Gear Lubri-
cant SAE 75W85 (API GL-5).
FLUIDS, LUBRICANTS, AND GENUINE PARTS SRT
Important Information
CAUTION!
Mixing of engine coolant (antifreeze) other than specified Organic Additive Tech-
nology (OAT) engine coolant (antifreeze), may result in engine damage and may
decrease corrosion protection. Organic Additive Technology (OAT) engine coolant is
different and should not be mixed with Hybrid Organic Additive Technology (HOAT)
engine coolant (antifreeze) or any “globally compatible” coolant (antifreeze). If a
non-OAT engine coolant (antifreeze) is introduced into the cooling system in an
emergency, the cooling system will need to be drained, flushed, and refilled with
fresh OAT coolant (conforming to MS.90032), by an authorized dealer as soon as
possible.
Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do
not use additional rust inhibitors or antirust products, as they may not be compat-
ible with the radiator engine coolant and may plug the radiator .
This vehicle has not been designed for use with propylene glycol-based engine
coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is
not recommended.
Engine
Component Fluid, Lubricant, or Genuine Part
Engine/Intercooler Coolant W e recommend you use MOPAR Antifreeze/Coolant 10 Y ear/
150,000 Mile Formula OAT coolant conforming to
MS.90032.
Engine Oil For best performance and maximum protection under all
types of operating conditions, the manufacturer only recom-
mends full synthetic engine oils.
The manufacturer recommends the use of Pennzoil Ultra
0W -40 or equivalent MOP AR engine oil meeting the re-
quirements of FCA Material Standard MS-12633 for use in
all operating temperatures.
Engine Oil Filter MOPAR Engine Oil Filter or equivalent.
MAINTAINING YOUR VEHICLE
199

Table of Contents

Other manuals for Dodge 2016 Challenger

Related product manuals