Automatic High Beams
The Automatic High Beams system provides increased forward lighting at night by
automating high beam control through the use of a digital camera mounted above the
inside rearview mirror . This camera detects vehicle specific light and automatically
switches from high beams to low beams until the approaching vehicle is out of view . This
feature is programmable through the Uconnect system. Refer to “Uconnect Settings” in
“Understanding Y our Instrument Panel” in the Owner's Manual on the DVD for further
details.
Instrument Panel Dimmer
• Rotate the dimmer control to the extreme bottom position to fully dim the instrument
panel lights and prevent the interior lights from illuminating when a door is opened.
• Rotate the dimmer control up to increase the brightness of the instrument panel and
cupholders when the parking lights or headlights are on.
• Rotate the dimmer control up to the next detent position to fully brighten the odometer
and radio when the parking lights or headlights are on.
• Rotate the dimmer control up to the last detent position to turn on the interior lighting.
• If your vehicle is equipped with a touchscreen, the dimming is programmable through
the Uconnect system. Refer to “Uconnect Settings” in “Understanding Y our Instru-
ment Panel” in the Owner's Manual on the DVD for further details.
Ambient Light Dimmer
• Rotate the ambient light control up or down to increase or decrease the brightness of
the release handle, map pocket (if equipped), overhead and floor lighting when the
parking lights or headlights are on.
• Rotate to extreme bottom position to turn off.
OPERATING YOUR VEHICLE
47
To Next Page
Loading...
