NOTE:
For assistance in pairing your phone, contact Uconnect customer support at 1-877-855-8400
or visit
UconnectPhone.com for phone compatibility, pairing instructions and details.
Canadian Residents: call 1-800-465-2001 (English) or 1-800-387-9983 (French) or
visit UconnectPhone.com.
When your phone finds the system, select “Uconnect” as the paired device.
Complete The Pairing Procedure
When prompted on the phone, enter the 4-digit PIN number shown on the radio display.
If your phone asks you to accept a connection request from Uconnect, select “Y es”.
If available, check the box telling it not to ask again – that way your phone will auto-
matically connect each time you start the vehicle.
Phonebook Download — Automatic Phonebook Transfer From Mobile Phone
If equipped and specifically supported by your phone, Uconnect Phone automatically
downloads names (text names) and number entries from your mobile phone’s phonebook.
Specific Bluetooth Phones with Phone Book Access Profile may support this feature. See
UconnectPhone.com for supported phones.
Automatic download and update, if supported, begins as soon as the Bluetooth wireless
phone connection is made to the Uconnect Phone, for example, after you start the vehicle.
NOTE:
You may be asked for permission to initiate the phonebook download.
• A maximum of 1,000 entries per phone will be downloaded and updated every time a
phone is connected to the Uconnect Phone.
• Depending on the maximum number of entries downloaded, there may be a short delay
before the latest downloaded names can be used. Until then, if available, the previously
downloaded phonebook is available for use.
• Only the phonebook of the currently connected mobile phone is accessible.
• Only the mobile phone’s phonebook is downloaded. SIM card phonebook is not part of
the Mobile phonebook.
• This downloaded phonebook cannot be edited or deleted on the Uconnect Phone.
These can only be edited on the mobile phone. The changes are transferred and
updated to Uconnect Phone on the next phone connection.
Making A Phone Call
• Push the “Phone” button .
• After the BEEP, say “dial” (or “call” a name).
Receiving A Call — Accept (And End)
•
When an incoming call rings/is announced on Uconnect, push the “Phone” button .
• To end a call, push the “Phone” button .
ELECTRONICS
64
To Next Page
Loading...
Need help?
General
