Receiving A Call — Accept (And End)
When an incoming call rings/is announced on Uconnect, push the “Phone” button .
To end a call, push the Phone button
.
Mute (Or Unmute) Microphone During Call
During a call, press the “Mute” button on the Phone main touchscreen to mute and
unmute the call.
Transfer Ongoing Call Between Handset And Vehicle
During an on-going call, press the “Transfer” button on the touchscreen to transfer an
on-going call between handset and vehicle.
Common Phone Commands (Examples)
“Call John Smith” “Show Missed Calls”
“Call John Smith mobile” “Show Recent Calls”
“Dial 1 248 555 12XX” “Show My Contacts”
“Call Emergency” “Redial”
“Call Towing Assistance” “Call Back”
“Redial” “Send 1234#” (only available while call is
active)
“Search for John Smith”
Phonebook
Uconnect radios will automatically down-
load your contact list from your paired
phone, if this feature is supported by your
phone. Entries are updated each time that
the phone is paired. If your contact list
entries do not appear , check the settings on
your phone. Some phones require you to
enable this feature manually.
Your phonebook can be browsed on your
radio screen, but editing can only be done
on your phone. To browse, press the Phone
button on the touchscreen, then the Phone-
book button on the touchscreen.
Favorite phonebook entries can be saved as Favorites for quicker access. Favorites are
shown at the top of your main phone screen.
Phonebook
ELECTRONICS
90
To Next Page
Loading...
Need help?
General
