Voice Command Tips
The Phone button is for placing calls, or responding to texts, or Phone controls.
The V oice Command
button is for controlling Media, such as changing broadcast
modes, (FM, SATELLITE), or Tuning to stations (95.5 or “Symphony Hall”).
Take care to speak into the V oice Command System as calmly and normally as possible.
The ability of V oice Command to recognize user voice commands may be negatively
affected by rapid speaking or a raised voice level.
Use longer names that are less easily mistaken for others. For examples, say “Call John
Doe” instead of “Call John”.
You can “chain” commands together for faster results. Say “Call John Doe, mobile”, for
example.
You can interrupt while the system is talking to you, enabling you to say your response
without waiting. Just push the
button on the steering wheel to say your command.
Changing The Volume
Start a dialogue by pushing the “Phone” button , then say a command for example
- “Help”.
Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level
while the Uconnect system is speaking. Please note the volume setting for Uconnect is
different than the audio system.
NOTE:
To access help, push the “Uconnect Phone”
button on the steering wheel and say
“help.” Touch the display or push either
or button and say “cancel” to
cancel the help session.
Voice Text Reply
Uconnect Phone can read or send new text messages on your mobile phone.
Your mobile phone must support Voice Text Reply over Bluetooth in order to use this
feature. If the Uconnect Phone determines your phone is not compatible with Voice Text
Reply messaging over Bluetooth the “Messaging” button will be greyed out and the
feature will not be available for use.
For mobile phone compatibility and pairing instructions, please visit
UconnectPhone.com.
ELECTRONICS
91
To Next Page
Loading...
Need help?
General
