DOF EDGE - Scan Data Alignment and Post-Processing; Matching Scan Data; Post-Processing Operations

17
Previous Model
Auto Align - Automatically allocates 3 dots among scanned
data.
Match - Helps to join manually allocated data.
Next Model
Match
Match – Combines scanned data.
V.A Alignment (Virtual Articulator Alignment) - Transfers
position of fully articulated models to CAD.
CADapp – Directly takes to designing platform (saves data
automatically).
Build – Prepares rendering process for designing.
Hole Filling - Fills up misscanned area.
Trim – Removes unnecessary data for optimum data
process.
Save – Saves STL le.
Post Setting